NovAtel SE-D-L1L2-G-Z: angular two-frequency GNSS complex

NovAtel SE-D-L1L2-G-Z: angular two-frequency GNSS complex
NovAtel SE-D-L1L2-G-Z: angular two-frequency GNSS complex
Dual-frequency GNSS (L1+L2 GPS+GLONASS) receiver
On request
On order
NovAtel SE-D-L1L2-G-Z: angular two-frequency GNSS complex

NovAtel SE-D-L1L2-G-Z: dual-frequency GNSS (L1+L2 GPS+GLONASS) receiver with two antenna inputs for solving tasks of high-precision positioning and determination of angular orientation parameters (course and pitch angles - heading). The receiver is equipped with a removable CF memory card for recording measurements and position determination results, as well as a set of switching interface ports for connecting external devices. The delivery includes two high-precision antennas Antcom/NovAtel G5Ant-42AT (ARINC-743) and antenna cables up to 10 m long (with TNC-TNC connectors). The basis of the implementation of the complex is laid by the patented company NovAtel Inc. (Calgary, Canada) ALIGN® Heading technology. The complex is designed for land, aviation and marine applications.

Completeness:

  1. Basic device - NovAtel SE-D GNSS receiver - 1 pc.
  2. Low-profile GNSS antenna NovAtel/Antcom G5Ant-42AT1 (ARINC-743) – 2 pcs.
  3. Antenna cable, 10 m, TNC connector - 2 pcs.
  4. Power cable of the basic device - 1 pc.
  5. Set of interface cables of the basic device - 1 set.
  6. NovAtel Connect interface software – 1 CD.
  7. Operating manual - 1 pc.
  8. Technical passport with warranty card - 1 pc
Positioning accuracy(RMS)
Autonomous L1/L2
1,2 m
SBAS (in the EGNOS operating area)
0,6 m
DGPS
0,45 m
OmniSTAR
subscription required
- VBS
0,7 m
- XP
0.15 m (if there is a subscription)
- HP
0,1 m
RTK
10 mm + 1 ppm (RT-2).
Post-session processing
3-5 mm + 1 ppm
Determination of angles (heading)
0.4 degrees
antenna base 0.5
0.2 degrees
antenna base 1 m
0.1 degrees
antenna base 2 m
General characteristics
Time accuracy
20 нs
Data release frequency
up to 20 Hz (option up to 200 Hz - measurements)
Connectors
Feeding
4 pin ODU Mini Snap, Series K
I/O
30 pin ODU Mini Snap, Series K
Ethernet
RJ-45
USB
type B (device), type A (host)
Interface ports
RS-232, RS-422
4
USB
1 x host + 1 x device
Ethernet
1
Input for inertial block
1
Input for RTK corrections
1
Power parameters
Voltage
from 9V to 30V DC
Power
up to 12 W
Dimensions and weight
Size
247 x 199 x 76 mm
Weight
3.4 kg
Working conditions
Working temperature
from -40C to +65C
Humidity
95% (non-condensing)